SSW Compliance Isuzu (Nh Series) NPS 4X4 2008+ Single Cab Kit Only

This SSW compliance kit is designed to suit Isuzu NH Series NPS 4x4 2008+ single cab vehicles requiring components for Super Single Wheels compliance preparation.

The kit includes the required rear wheel nuts to replace the dual wheel nut setup, fibreglass wheel flares, fitting instructions, safety wheel indicators, and a speedometer recalibration unit that must be fitted before the vehicle is submitted to the engineer for final on-road compliance.

An email or printed document advising the compliance procedure is also included.

Product Details

• Product: SSW Compliance Isuzu NH Series NPS 4x4 2008+ Single Cab Kit Only
• Vehicle fitment: Isuzu NH Series NPS 4x4 2008+ single cab
• Use: Super Single Wheels compliance kit components
• Compliance type: Kit only

Kit Includes

• 12 wheel nuts to replace the rear dual wheel nut setup
• Pair of fibreglass wheel flares
• Fitting instructions
• New tyre placard, tyre load dependent
• 24 orange safety wheel indicators
• Speedometer recalibration unit
• Email or printed compliance procedure document

Packing List

• 2 x flares
• 2m flare rubber
• 1 x instructions
• 1 x tyre placard
• 6 + 6 wheel nuts
• 24 x indicators
• 1 x speedometer recalibration unit

Tyre Placard Note

• The tyre placard is tyre load dependent.
• The tyre placard is not supplied if tyres are not supplied and fitted by AAV4x4.

Single Cab Fitment Notes

• For single cab vehicles, the front step will need to be modified for cabin tilt.
• A new set of modified front steps can be supplied for $270 using Product Code AU220079.
• The 3 step retaining bolts will need to be modified for full wheel lock and articulation.
• The speedometer recalibration unit must be fitted before the vehicle is submitted to the engineer for final on-road compliance.

Compliance Notes

• A compliance modification plate is required for on-road use.
• The compliance modification plate is obtainable from AAV4x4’s referred list of engineers.
• Compliance is only available for vehicles over 4,495kg GVM.

Important: This is a kit-only product for Super Single Wheels compliance preparation. Final on-road compliance requires a compliance modification plate from an approved engineer and is only available for vehicles over 4,495kg GVM.