SSW Compliance Isuzu (Nh Series) NPS 4X4 With Abs 2014+ Crew Cab - Kit

This SSW compliance kit is designed to suit Isuzu NH Series NPS 4x4 with ABS, 2014+ crew cab vehicles requiring components for Super Single Wheels compliance preparation.

The kit includes the rear wheel nuts required to replace the dual wheel nut setup, a pair of fibreglass front wheel flares, a tyre placard where applicable, and 24 orange safety wheel indicators.

For this model, speedometer and odometer recalibration must be completed at an Isuzu workshop.

Product Details

• Product: SSW Compliance Isuzu NH Series NPS 4x4 With ABS 2014+ Crew Cab Kit
• Vehicle fitment: Isuzu NH Series NPS 4x4 with ABS, 2014+ crew cab
• Use: Super Single Wheels compliance kit components
• Compliance type: Kit only

Kit Includes

• 12 wheel nuts to replace the rear dual wheel nut setup
• Pair of fibreglass front wheel flares
• New tyre placard, tyre load dependent
• 24 orange safety wheel indicators

Packing List

• 2 x flares
• 2 x extensions
• 2.5m flare rubber
• 1 x instructions
• 1 x tyre placard
• 6 + 6 wheel nuts
• 24 x indicators

Tyre Placard Note

• The tyre placard is tyre load dependent.
• The tyre placard is not supplied if tyres are not supplied and fitted by AAV4x4.

Fitment Notes

• Speedometer and odometer recalibration must be completed at an Isuzu workshop.
• The current fitment notes state that the front step on the single cab will also need to be modified for cabin tilt.
• A new set of modified front steps can be supplied for $270 using Product Code AU220079.
• The 3 front step retaining bolts will need to be modified for full wheel lock and articulation.

Compliance Notes

• A compliance modification plate is required for on-road use.
• The compliance modification plate is obtainable from AAV4x4’s referred list of engineers.
• Compliance is only available for vehicles over 4,495kg GVM.

Important: This is a kit-only product for Super Single Wheels compliance preparation. Final on-road compliance requires a compliance modification plate from an approved engineer and is only available for vehicles over 4,495kg GVM. Speedometer and odometer recalibration must be completed at an Isuzu workshop.