Fuso Canter FGB71 Fuel Filter Wrench

Steps to Use a Fuel Filter Wrench on an FGB71 Fuso Canter:Steps to Use a Fuel Filter Wrench on an FGB71 Fuso Canter: 1. Preparation ·Park the vehicle on a level surface and turn off the engine. ·Allow the engine to cool to avoid burns from hot components. ·Gather your tools: * Fuel filter wrench (correct size for the FGB71 fuel filter housing) * New fuel filter (if replacing) * Drain pan * Gloves and rags 2. Locate the OEM Fuel Filter which is usually near the fuel tank 3. Disconnect the water sensor plug 4. Drain any water from the bottom of the filter by removing the drain plug at the bottom of the fuel filter housing. 4. Removing the Fuel Filter * Place the fuel filter wrench around the housing. * Turn counterclockwise to loosen the filter housing. * Carefully remove the old filter from the housing, ensuring no debris enters the system. * Clean all components 5. Installing the New Fuel Filter * The new filter usually comes with a new gasket * Lubricate the new filter’s gasket with clean diesel fuel. * Replace the water drain plug * Install the new filter into the housing. * Use the fuel filter wrench to tighten the housing clockwise until snug (avoid over tightening). 6. Priming the Fuel System * If your model has a primer pump, operate it several times to remove air from the fuel lines. * Start the engine and check for leaks. This method ensures a secure, damage-free fuel filter change while preventing fuel system issues.