Item added to your cart
SKU: AU206417-12V
.
Only 4 products left
Pickup available at AAV 4x4
Usually ready in 24 hours
The Saber HDX 20,000lb Electric Winch is a heavy-duty 12V recovery winch built for large 4WDs, expedition vehicles, commercial trucks and other applications where substantial pulling capacity is required.
With a rated pulling capacity of 20,000lb – approximately 9,072kg, the HDX is designed for demanding recovery situations involving heavier vehicles and loaded touring rigs.
This version is supplied with 25 metres of 12mm synthetic winch rope and incorporates an automatic load-holding brake, thermal overload protection and weather-sealed electrical controls for dependable operation in harsh recovery environments.
This product is supplied unfitted. Vehicle installation, electrical connection and any vehicle-specific winch cradle or mounting hardware are not included unless separately specified.
The HDX provides a rated pulling capacity of 20,000lb, equivalent to approximately 9.1 tonnes of single-line pull.
This substantial capacity makes it particularly relevant to larger vehicles where a conventional passenger-4WD winch may not provide an appropriate level of recovery capacity.
Typical applications include:
Recovery requirements increase considerably as vehicle mass rises. Expedition bodies, fuel, water, batteries, tools, recovery equipment and touring gear can all contribute to the total weight of a completed vehicle.
The 20,000lb HDX is designed around these more demanding recovery applications, providing the pulling capacity required for appropriately engineered installations on larger vehicles.
This version is supplied with 25 metres of 12mm synthetic winch rope.
Synthetic rope provides a lightweight alternative to traditional steel winch cable and is well suited to modern vehicle recovery installations.
Correct rope inspection, spooling and protection from abrasion remain important for maintaining the condition of the winch rope throughout its service life.
This is the 12V version of the 20,000lb HDX winch and is intended for vehicles with a suitably configured 12V electrical system.
A winch of this capacity places substantial demand on the vehicle electrical system. Appropriate battery capacity, cable sizing, electrical protection and high-current connections are essential for reliable performance.
An automatic load-holding brake forms part of the winch design, helping control the drum and prevent unintended rollback when the winch is holding a load.
This provides important control during demanding recovery operations where accurate and predictable winch operation is required.
Heavy winching generates substantial heat in the motor and electrical system.
The HDX incorporates thermal overload protection to help protect the winch system when operating temperatures become excessive.
Winch duty cycles and operating temperature should still be monitored during extended or high-load recovery work.
The winch incorporates weather-sealed control components to help protect the electrical system from the dirt, moisture and harsh environmental conditions commonly encountered during off-road recovery.
The sealed solenoid and control arrangement is particularly valuable on vehicles that routinely operate through dust, mud, rain and remote-area conditions.
The HDX range is built around a reinforced heavy-duty construction intended for high-load recovery work.
The rugged housing protects the internal winch mechanism, while corrosion-resistant finishes and protected electrical components help prepare the unit for demanding touring and commercial environments.
Despite its substantial 20,000lb pulling capacity, the winch measures approximately:
These dimensions should be checked carefully against the intended winch cradle or bull bar before installation.
The combination of high pulling capacity, synthetic rope and heavy-duty construction makes the HDX 20,000lb particularly suitable for vehicles operating beyond normal recreational 4WD applications.
Ideal applications include:
| Winch Type | Heavy-duty electric recovery winch |
|---|---|
| Rated Pulling Capacity | 20,000lb |
| Approximate Metric Capacity | 9,072kg |
| Operating Voltage | 12V DC |
| Winch Rope | Synthetic |
| Rope Diameter | 12mm |
| Rope Length | 25m |
| Brake | Automatic load-holding brake |
| Thermal Protection | Yes – thermal overload protection |
| Control Protection | Weather-sealed controls |
| Solenoid | Sealed |
| Overall Length | 605mm |
| Overall Width | 192mm |
| Overall Height | 203mm |
| Weight | Approximately 40kg |
| Installation | Supplied unfitted |
This product is supplied unfitted. Vehicle installation and installation labour are not included.
A compatible winch cradle, bull bar or mounting structure capable of supporting the winch and expected recovery loads is required.
This is specifically the 12V version. Confirm the vehicle's electrical system and intended winch power supply before installation.
Because this is a high-capacity electric winch, correct battery capacity, cable sizing, electrical connections and mounting are critical to reliable operation.
Always use appropriately rated recovery points, recovery equipment and safe winching procedures suitable for the vehicle and recovery situation.
View Details