From the R & D Team of AAV, Introducing Kinetic sub-frame mounts for Fuso and Isuzu – Check Now
Australian Adventure Vehicles know Fuso Canters having driven them for over 12 years and in excess of 350,000 kms across Australia and across the world.
The enhancements we offer are proven over the distance and will change your Mitsubishi Fuso Canter 4×4 into one extremely capable vehicle both on and off road.
Our 37″ Super Singles are Simply the most significant change to your 4×4 Canter.
View Our Fuso Accessory List Here!
WATCH THE REVIEW VIDEO ON OUR SUPER SINGLES (WHEELS)
37" Super Single Wheels by AAV4X4
FITTED & BALANCED on 17×9″ Steel Rims Load Rated to 1950Kg or 2150Kg With a choice of the following 35 or 37″ 10 Ply Flotation Tyres.
1. Gladiator X-Comp AT 37×13.5 R17 135Q Super Single Wheel ($1,185)
2. Hankook Dynapro 37×12.5 R17 129Q Super Single Wheel ($1,185)
3. Gladiator X-Comp MT 37×13.5 R17 135Q Super Single Wheel ($1,345)
4. Federal Xplora 37×12.5R17 137Q Super Single Wheel ($1,345)
5. Federal Xplora 35×12.5R17 137Q Super Single Wheel ($1,185)
Reasons to buy Super Singles
– Quality of ride is vastly improved. Off-road driving through sand, mud or snow is now incredibly easy.
– Improved Approach, Ramp Over and Departure angle.
– The 14% increase in rolling diameter of the tyre, reduces the RPM for the same speed thus improving fuel economy, lowers engine wear, engine noise, and provides a higher cruising speed.
– Makes the vehicle look and drive as it should
– Discuss with us your anticipated use to receive the ideal tyre for your application.
Option 1. Fitment on site at AAV4x4 Brendale/Brisbane
Fitment of 5 x 37” Super Single Wheels (rims with tyres fitted and balanced), Pair Fibreglass Wheel Flares; Extended Front Mud Flaps; Wheel nuts and indicators; New Tyre Placard; Speedo & Odometer re-calibration; A Compliance plate fitted by our Engineer – ON SITE ONLY & PRE-BOOKING IS NECESSARY.
Prices are vehicle dependent and start from $6,845 for 5 wheels (rims with tyres fitted and balanced) and includes on-road compliance
Option 2. The Off-Site fitment:
5 x 37” Super Single Wheels (rims with tyres fitted and balanced), Pair Fibreglass Wheel Flares (and fitting instructions); Extended Front Mud Flaps; Wheel nuts and indicators; and a New Tyre Placard; Speedo recalibration is either with a supplied correction device for the FG84 or for the FGB71 model it has to be attended to by Fuso at their service division. An E-mail or printed document is supplied outlining the compliance procedure and a list of Australian engineers who can attend to the compliance plating.
Kit Prices and items supplied are vehicle dependent.
37" Tyre Options
Gladiator X-Comp AT 135Q
37” x 13.5 R17 135Q 2180Kg@160KPH
Made in Thailand (Not China)
If you require a great tyre for a very quiet and a smooth controlled ride for all driving conditions on and off road then this is the one to have.
Ideal for highway driving, and because of the tight tread it’s a great sand driving tyre.
The tyre shoulder area incorporates X Comp’s proven aggressive and functional design, giving protection and traction when needed.
In summary, this new tyre is very quiet with a smooth controlled ride for all driving conditions on and off road.
We have searched the world for many years for a tyre like this and now import directly from the manufacturer in Thailand.
Super Single Wheels $1,185 each
Replacement Tyre only $525 each
Hankook Dynapro MT 129Q
37″ x 12.5 R17 129Q 1850Kg@160KPH
These are a great tyre and our personal recommendation. Our trucks achieve around 60,000Kms from a set of four.
This higher load rated Dynapro, AAV4x4 import by container load directly from Hankook in Korea.
On-road, the noise level is much less than the other options yet they are great off-road tyre giving good positive direction and feel.
Airing down for sand driving gives a massive footprint.
Super Single Wheels $1,185 each
Replacement Tyre $525 each
Gladiator X-Comp MT 135Q
37” x 13.5 R17 135Q 2180Kg@160KPH
Made in Thailand (Not China)
If you require a wider stance tyre then this is the one to have.
Stating the Tread and Sidewall Design is aggressive is an understatement. This tyre is a beast!
Maximum traction and grip on the shoulder area of the tyre where it’s needed the most.
Self-cleaning tread and shoulder area to prevent mud, rock and snow build up
Super Single Wheels $1,345 each
Replacement Tyre $685 each
Federal Xplora Tyre 37 x12.5 R17 137Q
37″ x12.5 R17 137Q 1950Kg@160KPH
The Federal Xplora is an all season, high load and speed Rugged Terrain (RT) tyre that fits well between a Mud (MT) and All Terrain (AT) tyre.
It is designed for good on-road use and for the off-road enthusiast where traction on varied surfaces including the black top, mud, rock, gravel, sand, and snow/ice is required.
The Federal Xplora brand is proven and from trusted manufacture.
Super Single Wheels $1,345 each
Replacement Tyre $685 each
Federal Xplora 35 x 12.5 R17 137Q
35″ x 12.5 R17 137Q 2180Kg@160KPH
This slightly smaller diameter tyre and higher load capacity is most suitable when towing for extended distances, caravans or boats over 2500Kg
The Federal Xplora is designed to give exceptional off-road performance coupled with on-road comfort and sophistication. On-road, this tyre gives drivers superior handling with a quiet and smooth ride, while off-road it has the capability to go anywhere that a pure MT tyre can. The Federal Xplora offers both aggressive and rugged looks with great on/off-road performance and has been designed to be a combination between an All-Terrain and Mud-Terrain tyre to offer the best of both worlds.
Super Single Wheels $1,185 each
Replacement Tyre $495 each
Tow Bar Wiring Kit (4x4 Fuso Canter)
Introducing the ultimate solution for hassle-free trailer wiring installation – the Fuso Canter 7 pin flat wiring kit from AAV4x4! Say goodbye to tedious soldering and complex installations. With our kit, you'll have your vehicle ready to tow in under 5 minutes!
Don't let complicated wiring installations hold you back. Upgrade to the Fuso Canter AAV4x4 tow bar wiring kit and experience effortless towing like never before!
Here's what makes our Tow Bar Wiring Kit stand out:
Price is AUD $295 including GST
Effortless Installation: No more spending hours trying to figure out complicated wiring diagrams. Our kit connects seamlessly into the standard Fuso wiring loom with just 1 plug and a 12v power source. It's as simple as plug and play!
No Soldering Required: Leave the soldering iron in the toolbox! Our kit eliminates the need for soldering, saving you time and effort. Just plug in and you're ready to hit the road.
Universal Tow Module: We've included a Universal Tow Module to enhance your towing experience.
Here's what it offers:
Designed to run the trailer lights without adding load to your vehicle's light circuits.
Prevents interference with the electrical system, so you won't have to worry about warning lights flashing on the dash or external lights acting up.
This multiple voltage trailer light converter takes the load off your vehicle's electronic system when connecting a trailer or caravan, ensuring smooth operation every time.
Bull Bar
Bull Bar – Winch Compatible with Low Beam Lights – For lifted vehicles
Great front-end protection for your FGB71 with the added offering a secure mount platform for an electric self-recovery winch.
Fully ADR compliant and air bag compatible these bars are made from lightweight 6mm Hi-Tensile Structural Alloy, ensuring the front end is well protected.
Fitted $4,900 – Supplied Unfitted $4700
All Prices quoted are including GST
TPMS – Tyre Pressure Monitoring System
Protect your tyres and safety by adding the AAV Tyre TPMS system.
Available for 5 or 6 wheels.
Monitors high and low pressure as well as temperature while on or off-road.
Senders fitted for $150 when ordering new Super Single Wheels.
5 Tyre System for $700
6 Tyre system for $700
Suspension - Parabolic
Looking for a vast improvement in ride and more off-road articulation?
Then this is the answer.
Front 4 leaf Parabolic springs with 50mm lift + Powerdown Double Acting replacement shocks.
Rear OEM springs are blocked to match the extra 50mm front height + Powerdown Double Acting replacement shocks, and greaseable shackles all round.
Parabolic springs are a ‘comfort’ spring thus we do not recommend them for the load carrying rear.
The ultimate improved ride and performance suspension is the above upgraded with the addition of 4 x Piranha 8 way compression adjustable Remote Canister Shocks
Option 1: Parabolic Front, OEM Blocked Rear + F&R Long Shocks
Option 2: Parabolic Front, OEM Blocked Rear + F&R Remote Canister Shocks
Option 3: Parabolic Front, Load Multi-Leaf Rear + F&R Long Shocks
Option 4: Parabolic Front, Load Multi-Leaf Rear + F&R Remote Canister Shocks
Option 1: Supply $3,025 / Fitted $5,025 - Option 2: Supply $5,025 / Fitted $7,450
Option 3: Supply $4,065 / Fitted $6,915 - Option 4: Supply $6,315 / Fitted $9,180
For earlier Canter models please ask us for pricing
Suspension - Multi-leaf
Option 1: Suspension – Muilt-leaf Front, OEM Blocked Rear + F&R Long Shocks
Option 2: Suspension – Muilt-leaf Front, OEM Blocked Rear + F&R Remote Canister Shocks
Option 3: Suspension – Muilt-leaf Front, Load Muilt-Leaf Rear + F&R Long Shocks
Option 4: Suspension – Muilt-leaf Front, Load Muilt-Leaf Rear + F&R Remote Canister Shocks
Option 1: Supply $3,025 / Fitted $4,850 Option 2: Supply $4,925 / Fitted $7,185
Option 3: Supply $4,590 / Fitted $6,850 Option 4: Supply $6,260 / Fitted $8,940
For earlier Canter models please ask us for pricing
Self-Recovery Winch- Front
Fitted into your FGB71 winch compatible Bull Bar a 17,000 or 25,000lb 12V Electric Winch with lightweight Plasma Cable.
Wired with circuit breakers and isolation switch.
Add an optional Remote Hand Controller – $165
17,000Lb & 45m Plasma Cable – $3,500 / Supplied Unfitted $2,200
25,000Lb & 30m Plasma Cable– $4,260 / Supplied Unfitted $2,550
Self-Recovery Winch- Rear
Rear 17,000lb Winch & 4500kg Tow Bar & can fit 37″ tyre below
Wired with circuit breakers and isolation switch.
Rear winch cradle includes 2 x recovery points
Fitted price: $7,015 including TowBar
KIT - Rear Winch Carrier $1,650 + 17,000LB Winch $2,200
Tow Bar - 3500/4500Kg
The AAV4x4 – FGB71 3500kg/4500kg tow bar is designed so that a 37″ tyre can still be retained within the chassis rails.
The 3,500Kg rated Tow Bar is supplied with a 50mm ball and fitting includes a 7 Pin Flat Plug and ECU Wiring Distribution Box. Actual towing capacity is dependant on the host vehicles GVM
The 4,500kg rated Tow Bar is supplied with a 70mm ball and fitting includes a 7 Pin Flat Plug and ECU Wiring Distribution Box. Towing capacity 4,500Kg
Optional Super Duty adjustable hitch tongue rated to 4500kgs GTW and complies with ADR62/02. 16 stages of height adjustment $145
Optional Rear Winch Carrier $1650
Fitted 3,500Kg rated Tow Bar $2,160. (KIT $1,675)
Fitted 4,500Kg rated Tow Bar $2,485 (KIT $1,775)
Scrub Bar & Roof Pod
Available for the FG84 and FGB71 Single and Crew Cab
Protects the ‘A’ pillars from scrub damage, and provides further storage for light items.
The bars allow for fitment of light bars above and below the windscreen
Fitment is without body holes being drilled.
Single Cab $2,575 - KIT $2,350
Crew Cab $2,950 - Kit $2,550
Kinetic Tray Sub-Frame and 1 x 200Lt Diesel + 1 x 230Lt Water Tank
The Chassis of the Fuso Canters are designed to Flex, thus it is critical when mounting a body that one allows for this articulation.
Our Kinetic sub-frame allows this movement and also holds 1 x 200Lt Diesel (Total now 300Lts) tank, PLUS 1 x 230Lt Water tank.
Our supplied Alloy Trays can bolt directly onto this sub-frame. (Ask us for a quote for an Alloy Tray)
Due to the 230L Water tank dropping down into the chassis, the spare tyre carrier must be removed.
Single Cab $7,935
Crew Cab $7,935
Fuso E-Locker = 100% Traction
Will fit FG637, FG649, and FG84, FGB71.
YOUR ELECTRONIC PUSH BUTTON SOLUTION
In collaboration with Harrop Eaton, AAV4x4 have developed the E-Locker Differential for the full range of Fuso 4×4 trucks.
The E-Locker’s electromagnetic locking mechanism is the next generation of aftermarket differential technology. The Harrop Eaton E-Locker performs as an open differential until you decide that you need more traction. When locked the Harrop Eaton E-Locker performs as a full locker, capturing 100% of the available torque and sending it equally to both ends of the axle.
Fitted $4,700
Kit $2650
Suspension Seating
Upgrade to the Ultimate in Suspension Seating for the FG84 and FGB71.
The Stratos LTSS3000 Proven to considerably reduce vibration transmission to the occupant by up to 70%, the LTSS suspension system will provide both drivers and passenger with increased comfort and support in even the toughest four-wheel drive conditions.
A change of seating requires compliance at an extra cost.
Optional Fold Up Arm Rest $185 each.
Drivers Suspension Seat $ 3400 / Unfitted $2,990
Single Cab Passenger Suspension Seat $ 3,600 / Unfitted $2,990
3 seat Passenger Upgrade
The passenger side OEM bench seat is like a park bench.
AAV4x4 can completely re-upholster the FGB71 bench seat to match either the OEM colours or the Stratos Drivers seat.
Provides a passenger seat that you sink into and provides both lateral support at the base and for your back.
The centre seat is also re-upholstered continuing to provide a 3rd seating position.
No compliance is necessary
Fitted $1,995
Supply only $1,995
Steering Arm and Front Differential Guard
Designed to protect both the steering arm and differential against damage from rocks and tree stumps when travelling off-road.
Also protects these components should one hit wild animals on the road.
Fitted: $845
Kit: $780
Radiator Guard
Designed to protect the radiator and intercooler from sticks when travelling off-road.
Design allows for maximum air flow to the engine.
Fitted: $750
Kit: $695
Grab Handle & Extra Step
Grab Handle & Extra Step.
With increased vehicle height with 37″ wheels and suspension an extended pair of Stainless Steel Grab Handles and/or extra Step is the answer for ease of entry.
Fitted Grab Handle Pair $370 - Extra Step $485
Supply Kit Grab Handle Pair $370 - Extra Step $405
Fuel Management System
Modern diesel engines are equipped with advanced high pressure electronically controlled injection systems which can be easily damaged and the biggest enemy of this equipment is poor quality fuel, or more frequently contaminated fuel.
One way to provide the best protection to your engine is to install an additional fuel filter and water separator.
This 30 micron Fuel Manager Fuel Pre Filter is plumbed before your factory fuel filter prolonging your engine life and also extends the service life of your factory filter cartridge.
Fitted $580
Diff, Gear Box & Transfer Breathers
Diff, Gear Box & Transfer Breathers available for Fuso Canter.
Supply: $200
Fitted: $475
Bitumen Under Body and Chassis Rust Proofing SC/ DC
Bitumen Under Body and Chassis Rust Proofing SC/ DC.